Fix Your Stuff Community Store

Changes to Step #2

Edit by iRobot —

Edit approved by iRobot

Before
After
Unchanged

Step Lines

[title] Display
[* black] Carefully lay the iMac stand-side down on a flat surface.
-[* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip. A pair of angled [product|IF145-020|tweezers] can also work well.
+[* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip. A pair of [product|IF145-020-5|angled tweezers] can also work well.
[* black] Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame.
[* icon_note] After lifting the top edge of the display on one side, hold it out of the outer case while you use a hooked tool to lift the other side.
[* black] Raise and hold the display high enough to access the cables.
[* icon_caution] Do not lift the top edge of the display out of the outer case too far, as several short ribbon cables still connect the two components.