Changes to Step #2
Edit by theonw —
- Before
- After
- Unchanged
Step Lines
| [* black] Carefully lay the iMac stand-side down on a flat surface. | |
| [* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip. | |
| + | [* black] If you order the SSD Dual drive kit from iFixit, the kit includes a pair of tweezers, the angled points work great for this as well. |
| [* black] Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame. | |
| [* icon_note] After lifting the top edge of the display on one side, hold it out of the outer case while you use a hooked tool to lift the other side. | |
| [* black] Raise and hold the display high enough to access the cables. | |
| [* icon_caution] Do not lift the top edge of the display out of the outer case too far, as several short ribbon cables still connect the two components. |