Changes to Step #2
Edit by Jeff Suovanen —
Edit approved by Jeff Suovanen
- Before
- After
- Unchanged
Step Lines
| [* black] Carefully lay the iMac stand-side down on a flat surface. | |
| - | [* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip. |
| - | [* icon_note] Alternatively, our [product|IF174-002|Dual Hard Drive Kit] includes a pair of tweezers with an angled tip that are great for this task. |
| + | [* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip. A pair of angled tweezers can also work well. |
| [* black] Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame. | |
| [* icon_note] After lifting the top edge of the display on one side, hold it out of the outer case while you use a hooked tool to lift the other side. | |
| [* black] Raise and hold the display high enough to access the cables. | |
| [* icon_caution] Do not lift the top edge of the display out of the outer case too far, as several short ribbon cables still connect the two components. |