Changes to Step #22
Step Lines
| + | [title] Adding P+/P- wires |
|---|---|
| + | [* black] These are the charge/discharge ports of our battery pack |
| + | [* black] Be sure that the length of the wire is long enough to wire it to the Rollei outlet later. |
| + | [* black] If you use a multimeter to check the voltage you will see it's 0V |
| + | [* black] The PCB needs to be activated, we do this by doing some short charging |
Image 1
No previous image
Added
Image 2
No previous image
Added