Fix Your Stuff Community Store

Changes to Step #1

Edit by Patrick Hallahan —

Pending approval

Before
After
Unchanged

Step Lines

[* black] Remove the screws securing the bottom case to the keyboard.
- [* red] Remove the six 0.145 inch screws and the single 0.175 inch screws that had been concealed by the battery.
+ [* red] Remove the six 3.68 mm screws and the single 4.45 mm screws that had been concealed by the battery.
[* green] Use a pair of tweezers to remove the two rubber covers located at the upper left and right corners.
- [* green] With the rubber covers gone, two 0.178 inch screws should now be visible. Remove these screws.
+ [* green] With the rubber covers gone, two 4.52 mm screws should now be visible. Remove these screws.