Fix Your Stuff Community Store

Changes to Step #1

Edit by Mark Schroeder —

Edit approved by Justin Ogihara

Before
After
Unchanged

Step Lines

-[* black] Remove the screws securing the bottom case to the keyboard.
+[* red] Remove the screws securing the bottom case to the keyboard.
[* red] Remove the six 3.68 mm screws and the single 4.45 mm screw that had been concealed by the battery.
[* green] Use a pair of tweezers to remove the two rubber covers located at the upper left and right corners.
[* green] With the rubber covers gone, two 4.52 mm screws should now be visible. Remove these screws.