Changes to Step #9
Edit by Mingye Wang —
Edit approved by Adam O'Camb
- Before
- After
- Unchanged
Step Lines
| [* black] Use a spudger to remove the connector from the device, and remove the screen completely. | |
| + | [* icon_note] The flat-tipped opening tool is helpful for connecting the replacement screen to the device. |
| [* icon_reminder] Before applying new adhesive, clean the edges of the frame, taking special care to remove any small glass fragments. Clean adhesion areas with high concentration isopropyl alcohol (at least 90%). | |
| [* black] Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone. | |
| [* icon_reminder] The replacement adhesive should only be applied to the edges of the frame, but may come with the center filled in. | |
| [* black] To remove the unnecessary center section of the adhesive strip, carefully peel away the perforated rectangle in middle of the white backing. At the same time, peel up the black adhesive underneath the white backing. | |
| [* icon_note] Only adhesive for the edges of the frame should remain. |