Changes to Step #2
Edit by Chris Miyahira —
- Before
- After
- Unchanged
Step Lines
| - | [* black] Remove the clip connecting the top piece to the flash unit. |
|---|---|
| + | [* icon_caution] Do not proceed to the next step unless you have previous soldering experience because you can damage the flash unit if you are not careful. |
| + | [* black] Unsolder the five wires connected to the flash unit in order to remove it. |
| + | [* icon_note] If replacing the wires for the flash unit, you must also unsolder the wires that connect to the motherboard. |