Changes to Step #1
Edit by Ryan Bishop —
- Before
- After
- Unchanged
Step Lines
| [* black] Locate the solder on the side of the metal plate on the top half of the phone. | |
| [* black] Place a piece of solder wick on top of the solder. | |
| [* black] Very carefully, place the tip of the soldering iron on top of the solder wick. Hold it steady until the solder is soaked up into the solder wick. | |
| - | [* icon_caution] |
| + | [* icon_caution] The soldering iron will damage circuitry if held down for too long. |
| [* black] Cut off the used solder wick with pliers and repeat this step if any solder remains. |