Changes to Step #1
Edit by Ryan Bishop —
- Before
- After
- Unchanged
Step Lines
| - | [* |
|---|---|
| + | [* red] Locate the four solder joints (connected to the yellow, black, blue, and red wires) on the bottom part of the phone, connected to the speaker. It will appear as a black circular part with some holes in it. |
| [* black] Place a piece of solder wick on top of the solders. | |
| [* black] Very carefully, place the tip of the soldering iron on top of the solder wick. Hold it steady until the solder is soaked up into the solder wick. | |
| [* icon_caution] Soldering iron will damage circuitry if held down for too long. | |
| [* black] Cut off the used solder wick with pliers and repeat this step if any solder remains. |