Changes to Step #4
Step Lines
| [* icon_note] Re-orient your iMac so it sits upright on the stand. | |
| - | [* black] Insert a plastic card up into the corner of the air vent slot at the top of the rear case. |
| + | [* black] Insert a [product|IF145-101|plastic card] up into the corner of the air vent slot at the top of the rear case. |
| [* black] Push the card toward the top of the iMac to release the front bezel latch. | |
| [* black] Pull the front bezel away from the rear case. | |
| [* black] Repeat this process for the other side of the front bezel. | |
| [* icon_note] It may be necessary to apply several layers of duct tape to the top of the access card to aid in releasing the latches. | |
| [* icon_note] If the bezel refuses to release, try pressing the lower edge back onto the rear case and repeat this opening process. |