Fix Your Stuff Community Store

Changes to Step #1

Edit by Aubrey Sinden —

Edit approved by Aubrey Sinden

Before
After
Unchanged

Step Lines

[* black] Find the place in the channel of the screen frame where the ends of the spline meet.
[* icon_note] The channel is the deep, narrow line in one side of the frame, and spline is the plastic cord.
-[* black] Use a screwdriver to start prying out an end of the spline.
-[* black] When at least a couple inches of the spline is out, hold the spline with a hand and pull all of the spline out of the channel.
+[* black] Use a screwdriver to pry out an end of the spline.
+[* black] After removing a couple inches of the spline, hold the spline with a hand and pull all of the spline out of the channel.