Changes to Step #5
Edit by Aubrey Sinden —
Edit approved by Aubrey Sinden
- Before
- After
- Unchanged
Step Lines
| - | [* black] Use a pair of scissors or a utility knife to cut off the end of the roll, leaving a few inches extra from the edge of the frame. |
|---|---|
| - | [* black] Trim the other sides of the mesh, also leaving a few inches from the edges of the frame. |
| + | [* black] Use a pair of scissors or a utility knife to cut off the end of the roll, leaving around an extra inch outward from the frame. |
| + | [* icon_note] A utility knife is better for making precise cuts. |
| + | [* black] Trim the other sides of the mesh, also leaving around an inch over the edges of the frame. |