Fix Your Stuff Community Store

Changes to Step #6

Edit by Aubrey Sinden —

Edit approved by Aubrey Sinden

Before
After
Unchanged

Step Lines

-[* black] Cut off the corners of the mesh diagonally, leaving about an inch diagonally from the inner corner of the frame.
-[* icon_caution] Be careful not to cut too far into the mesh, or it will leave holes in the corners of the screen when it's finished.
+[* black] Cut off the corners of the mesh diagonally and leave a little extra mesh over the frame.
+ [* icon_caution] Be careful not to cut too far into the mesh, or it will leave holes in the corners of the screen when it's finished.