Changes to Step #7
Edit by Aubrey Sinden —
Edit approved by Aubrey Sinden
- Before
- After
- Unchanged
Step Lines
| - | [* black] With the convex side of the screen tool, press the mesh down into the channels and roll it down on every side. |
|---|---|
| + | [* black] Hold the mesh down firmly with one hand. |
| + | [* black] Use the convex side of the screen tool to press the mesh down into the channels. |
| + | [* black] Roll the screen rolling tool on every side's channel. |
| + | [* icon_note] Keep the mesh in the same place and stretch it as best as possible so the mesh will end up tight on the frame. |