Fix Your Stuff Community Store

Changes to Step #7

Edit by Aubrey Sinden —

Edit approved by Aubrey Sinden

Before
After
Unchanged

Step Lines

[* black] Hold the mesh down firmly with one hand.
[* black] Use the convex side of the screen rolling tool to press the mesh down into the channels.
[* icon_note] The convex disc on one side of the roll bulges outward, and the concave disc on the other side caves inward.
-[* black] Roll the screen rolling tool on every side's channel.
+[* black] Using the screen rolling tool, press the mesh into the frame channel on all sides of the frame.
[* icon_note] Keep the mesh in the same place and stretch it as best as possible so the mesh will end up tight on the frame.