Changes to Step #9
Edit by Aubrey Sinden —
Edit approved by Aubrey Sinden
- Before
- After
- Unchanged
Step Lines
| - | [* black] On a corner, press to the edge of the corner, pull the spline to line up with the perpendicular channel, and start pressing down and rolling the spline into the new channel. |
|---|---|
| - | [* black] To get the spline in the corners down, push it with the screwdriver. |
| + | [* black] Press the spline to the edge of the corner. |
| + | [* black] Pull the spline to line up with the perpendicular channel |
| + | [* black] Press down and roll the spline into the new channel. |
| + | [* icon_note] To get the spline in the corners, push it down with the screwdriver. |