Changes to Step #2
Edit by Arty Boomshaka —
Edit approved by Arty Boomshaka
- Before
- After
- Unchanged
Step Lines
| + | [title] Cracking the Case Open |
|---|---|
| + | [* red] Remove the six screws located on the underside of the system with a 4.5mm Gamebit screwdriver. |
| + | [* black] Turn the unit back up and lift the top cover. |
| + | [* icon_caution] At the top is a capacitors shield. Make sure they're discharged before removing it. (Capacitors can hold charge for a long time, switching the power switch on while unplugged should discharge them) |
| + | [* green] This is the front panel, requires a ribbon cable to be unplugged. |
| + | [* blue] This is part of the cartridge ejecting mechanism. |
Image 1
No previous image
Added
Image 2
No previous image
Added