Changes to Step #3
Edit by Walter Galan —
Edit approved by Walter Galan
- Before
- After
- Unchanged
Step Lines
| - | [* black] Use the tip of a spuder to flip up the retaining flap on the right fan ZIF connector. |
|---|---|
| + | [* black] Use the tip of a spudger to flip up the retaining flap on the right fan ribbon cable ZIF socket. |
| + | [* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself. |
| [* black] Gently pry up the right fan ribbon cable from the logic board. |