Changes to Step #4
Edit by Walter Galan —
Edit approved by Walter Galan
- Before
- After
- Unchanged
Step Lines
| - | [* black] Remove the following three |
|---|---|
| - | [* red] 4.4 mm |
| - | [* orange] 3.9 mm |
| - | [* yellow] 5.0 mm |
| + | [* black] Remove the following three screws securing the right fan to the logic board: |
| + | [* red] One 4.4 mm T5 Torx screw |
| + | [* orange] One 3.9 mm T5 Wide Head Torx screw |
| + | [* yellow] One 5.0 mm T5 Torx screw |