Changes to Step #4
Edit by johnsawyercjs —
Edit declined by Alex Diaz-Kokaisl
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the following three screws securing the right fan to the logic board: | |
| [* red] One 4.4 mm T5 Torx screw | |
| [* orange] One 3.9 mm T5 Wide Head Torx screw | |
| [* yellow] One 5.0 mm T5 Torx screw with 2 mm collar | |
| + | [* icon_note] The 3.9mm screw threads into a metal standoff that's glued to the logic board. If this standoff comes off of the board, reattach it to the fan with its screw, place a drop of superglue on the bottom of the standoff, then put the fan back into place and apply a little pressure to the top of the screw to help the superglue stick to the logic board. |