Changes to Step #1
Step Lines
| - | [* black] Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board. |
|---|---|
| + | [* black] Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board. On reassembly, connect this end first as it does not flex. |
| [* black] In a similar fashion, remove the I/O Board connector from its socket on the I/O Board. | |
| [* black] Remove the I/O Board cable from the MacBook Pro. |