Changes to Step #3
Edit by Walter Galan —
Edit approved by Walter Galan
- Before
- After
- Unchanged
Step Lines
| - | [* black] Peel back the piece of tape covering the keyboard cable connector. |
|---|---|
| - | [* black] Carefully push/pull the keyboard cable straight out of its socket on the logic board. |
| + | [* black] Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket. |
| + | [* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself. |
| + | [* black] Use the flat end of a spudger to pull the keyboard ribbon cable out of its socket. |