Changes to Step #3
Edit by Joseph Thomas —
Edit approved by Joseph Thomas
- Before
- After
- Unchanged
Step Lines
| [* icon_note] Switching over to the right joystick. | |
| - | [* icon_note] There |
| + | [* icon_note] There will be a green casing containing the joystick. First it must be removed. |
| [* icon_caution] Carefully remove the ribon from the entire section. | |
| - | [* black] Proceed to remove the two screws holding the casing down. They |
| + | [* black] Proceed to remove the two screws holding the casing down. They will be 6.35 mm screws and can be removed using a J00 Philips head bit. |