Changes to Step #3
Edit by Davis Loen —
Edit approved by Davis Loen
- Before
- After
- Unchanged
Step Lines
| [* icon_caution] Caution: Be careful to not break the three cables connected to the motherboard (two on each side and one in the rear) while separating the bottom panel from the rest of the device. | |
| - | [* black] Using a plastic prying device, separate the back panel from the front by prying around the panel. |
| - | [* black] Disconnect the two cables that connect the rear buttons to the motherboard |
| + | [* black] Using a plastic prying device, separate the back panel from the front by gently prying around the panel. |
| + | [* black] Using pliers, Disconnect the two cables that connect the rear buttons to the motherboard |