Changes to Step #1
Edit by Parvathy Nambidi —
Edit approved by Parvathy Nambidi
- Before
- After
- Unchanged
Step Lines
| [* icon_note] Power off the device before beginning disassembly. Disconnect all external devices. | |
| [* black] Flip the device on its back. | |
| - | [* red] Unscrew and remove the one 7.5 mm Phillips-head screw using Phillips #1 screwdriver. |
| - | [* orange] Unscrew twelve 6.0 mm Phillips-head screws using Phillips #1 screwdriver. |
| - | [* black] Use the plastic opening tool (which is short and has a thin end for prying open device parts) to pry open the lower case of the device. |