Changes to Step #5
Edit by Parvathy Nambidi —
Edit approved by Parvathy Nambidi
- Before
- After
- Unchanged
Step Lines
| + | [* black] Use the flat end of a spudger to lift the battery connector/cable from its socket in the logic board. |
|---|---|
| + | [* black] Lift the battery connector from under the ribbon cable above it. |
| + | [* black] Locate the battery and the three 4.00mm Philips-head screws that hold it in place. |
| + | [* black] Unscrew and remove the three screws. |
| + | [* black] Lift the battery up and remove. |