Changes to Step #5
Edit by Kevin Horwedel —
Edit approved by Kevin Horwedel
- Before
- After
- Unchanged
Step Lines
| + | [* black] Use tweezers to gently flip the small locking flaps of the zero force insertion connectors up. |
|---|---|
| + | [* red] Pull the bottom orange connector cable out of the zero force insertion connector using the tweezers. |
| + | [* black] Pull the top orange connector cable out of the zero force insertion connector using the tweezers. |
| + | [* orange] Remove the ribbon cables by gently pulling them away from the no-fuss ribbon cable connectors. |
| + | [* green] Remove the ribbon cables by gently pulling them away from the no-fuss ribbon cable connectors. |
| + | [* black] Disconnect the main board from the two ports on the left by pulling the main board to the right. |
Image 1
No previous image
Added