Changes to Step #5
Edit by KC Armstrong —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| [* yellow] The cable is just pushed into the connector. Use a pair of hemostats or tweezers to pull it straight out. Grab it close to the connector so that the cable wont tear. | |
| - | [* black] With the cable disconnected, separate the back |
| - | [* red] Remove the four screws from the LCD. |
| + | [* black] With the cable disconnected, separate the back-case from the camera. |
| + | [* red] Remove the four screws from the LCD (Liquid-crystal display). |