Changes to Step #1
Step Lines
| [* red] Using a screwdriver with a J000 Phillips bit, remove the fourteen 3.175 mm screws. | |
| [* black] Using a plastic opening tool, pry part of the panel up starting from the sides of the battery slot. | |
| - | [* orange] Use plastic tweezers to release the rest of the panel from plastic bits holding it in place and pry the panel up around the sides surrounding the fingerprint sensor and camera lens. |
| + | [* orange] Use plastic [product|IF145-020|tweezers] to release the rest of the panel from plastic bits holding it in place and pry the panel up around the sides surrounding the fingerprint sensor and camera lens. |