Skip to main content
Help

Samsung Galaxy Note20 Ultra Rear Cover Replacement

Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 17 guides that include this step.

Step Type:

Drag to rearrange

Apply a suction cup to the heated edge of the rear cover, as close to the edge as possible.

If your back glass is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken panel.

Pull up on the suction cup with strong, steady force to create a gap between the rear cover and the frame.

Depending on the age of your phone, this may be difficult. If you are having trouble, apply more heat to the edge and try again.

Insert an opening pick into the gap.

Don't insert the opening pick more than 5 mm into the phone or you risk damaging the internal components.

Your contributions are licensed under the open source Creative Commons license.