Fix Your Stuff Community Store
Help

Opening Procedure and Battery Disconnect

Editing Step 10 —
Add a title

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 17 guides that include this step.

Step Type:

Drag to rearrange

Insert a new opening pick into the bottom left corner and slide it around the corner toward the left edge.

Be careful cutting under the lower 2.5 inches (65 mm) of the left edge. Do not insert the opening pick more than 1/8 inch (3 mm) here. The display cables sit near this part of the bezel and are easily damaged. Once past the display cable area, do not insert the pick past the bezel.

Slide the pick along the left edge of the Surface to cut through the screen adhesive.

Leave this pick in the left edge to prevent the adhesive from resealing.

Your contributions are licensed under the open source Creative Commons license.