Skip to main content
Help

MacBook Core 2 Duo Upper Case Replacement

Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 38 guides that include this step.

Step Type:

Drag to rearrange

Remove the following 3 screws:

One 11 mm Phillips#00 in the middle of the lower case. (Head: 5mm dia. x .75mm thick)

Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)

If the screws stick in the case, you can use a magnetized screwdriver to draw them out.

The shorter of the three screws goes in the middle of the lower case.

Your contributions are licensed under the open source Creative Commons license.