Fix Your Stuff Community Store
Help

iPhone SE 2022 Home/Touch ID Sensor Replacement

Editing Step 3 —
Disconnect the home/Touch ID sensor

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Use an opening tool to pry under the left edge of the home/Touch ID sensor cable connector to disconnect it from its socket.

If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat end of a spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

Your contributions are licensed under the open source Creative Commons license.