Skip to main content
Help

iPad Air 4 Front Camera Replacement

Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Use the flat end of a spudger to disconnect the two display cables by lifting straight up on the press connectors.

To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.

Use tweezers to remove the front camera.

The camera is secured to the frame with weak foam adhesive.

During reassembly, use a small piece of Tesa tape to secure the front camera to the frame.

Your contributions are licensed under the open source Creative Commons license.