PowerBook G4 Aluminum 12" 867 MHz Heat Sink & Fan Replacement

Steps Rearrange

Introduction
Details
Guide Steps

Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 16 guides that include this step.

Step Type:

Drag to rearrange

Bold
Italic
Underline
Link
Peeling up yellow tape as necessary, remove the following 8 screws:
Bold
Italic
Underline
Link
One 4.5 mm Phillips on the right side of the heat sink.
Bold
Italic
Underline
Link
Three 6 mm Phillips near the display.
Bold
Italic
Underline
Link
Two large 7.5 mm Phillips with springs (don't forget to remove the springs). If the springs are not releasing, needle nose pliers can help get this done.
Bold
Italic
Underline
Link
Two 13 mm screws from the left side of the heat sink and the right side of the fan.

Delete Step Insert Step

« Previous

Your contributions are licensed under the open source Creative Commons license.

PowerBook G4 Aluminum 12" 867 MHz Heat Sink & Fan Replacement

Step Type:

Guide Step Edit Keyboard Shortcuts: