PowerBook G4 Aluminum 12" 867 MHz DC-to-DC Board Replacement

Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 16 guides that include this step.

Step Type:

Drag to rearrange

Bold
Italic
Underline
Link
Remove the following five screws:
Bold
Italic
Underline
Link
One 3 mm Phillips near the screen latch (mind the big magnet on the screen latch).
Bold
Italic
Underline
Link
Two 3.5 mm Phillips attaching the EMI fingers to the metal framework.
Bold
Italic
Underline
Link
One 10 mm Phillips near the optical drive.
Bold
Italic
Underline
Link
One 14 mm long 4 mm standoff in the upper left corner. You can remove this standoff either with a 4 mm nut driver or needlenose pliers.
Bold
Italic
Underline
Link
Lift the EMI fingers above the battery connector away from the metal framework.

Delete Step Insert Step

« Introduction

Your contributions are licensed under the open source Creative Commons license.

PowerBook G4 Aluminum 12" 867 MHz DC-to-DC Board Replacement

Step Type:

Guide Step Edit Keyboard Shortcuts: