Skip to main content
Help

iMac Intel 27" 2012-2019 Adhesive Strips Replacement

Editing Step 20 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

At this point it's a good idea to test your repair, in order to make sure your iMac works properly before you seal it back up. Follow the next three steps to temporarily reconnect the display cables and boot up your iMac prior to pulling the protective film off the adhesive strips.

If you've already verified that your iMac is working correctly and are ready to seal it up, skip to step 22.

Gently insert the display data connector into its socket on the logic board. Be sure to press it straight into the socket, and insert it completely.

Flip the display data connector lock down onto the socket.

Insert the display power connector into its socket on the logic board.

Your contributions are licensed under the open source Creative Commons license.