MacBook Unibody Model A1342 Front Display Bezel Replacement

Steps Rearrange

Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Step Type:

Drag to rearrange

Bold
Italic
Underline
Link
Insert the flat end of a spudger between the thin rubber strip surrounding the front display bezel and the rear display bezel.
Bold
Italic
Underline
Link
Do not try to insert the spudger between the thin rubber strip and the plastic face of the front display bezel.
Bold
Italic
Underline
Link
Use the flat end of your spudger to carefully pry the front display bezel away from the adhesive securing it to the rear display bezel.
Bold
Italic
Underline
Link
Do not pry against the fragile glass LCD panel. Also, do not excessively bend the plastic as it may permanently deform.
Bold
Italic
Underline
Link
Continue prying until the front display bezel is free along the right side of the display and behind the right clutch hinge.

Delete Step Insert Step

« Introduction

Your contributions are licensed under the open source Creative Commons license.

MacBook Unibody Model A1342 Front Display Bezel Replacement

Step Type:

Guide Step Edit Keyboard Shortcuts: