Skip to main content
Help

Motorola Moto G 1st Generation Midframe Replacement

Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Shut down the phone.

Push SIM card until it pops out.

Remove SIM card.

In some version of this phone, a microSD memory card can be installed. If so, you must also remove these cards.

Be careful as to not damage the microSD memory card. Unlike the SIM card, pushing this in may not spring release, as there may not be an eject mechanism.

If there is no spring release eject mechanism, hopefully your microSD card has a ridge/raised edge that you can push on with your fingernail or plastic/rubber tool to push the card out. This may be difficult - be patient and do not use excessive force/sharp tools that could cause permanent damage and permanent loss of data.

Your contributions are licensed under the open source Creative Commons license.