iPhone 4 Logic Board Replacement

Steps Rearrange

Editing Step 7 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 11 guides that include this step.

Step Type:

Drag to rearrange

Bold
Italic
Underline
Link
Remove the following five screws securing the Wi-Fi antenna to the logic board:
Bold
Italic
Underline
Link
One 2.3 mm Phillips
Bold
Italic
Underline
Link
Two 1.6 mm Phillips
Bold
Italic
Underline
Link
One 1.4 mm Phillips
Bold
Italic
Underline
Link
One 4.8 mm Phillips
Bold
Italic
Underline
Link
When re-assembling, start off with replacing the 4.8 mm Philips screw first, then the 2.3 mm. This is to ensure there is no mix-up, and avoid rendering the LCD and digitizer useless.
Bold
Italic
Underline
Link
Also make sure to put the long 4.8 mm Philips back in correctly when reassembling. This is the ground for the Wi-Fi antenna and is often the culprit if you are having bad Wi-Fi reception after reassembly.

Delete Step Insert Step

« Previous

Your contributions are licensed under the open source Creative Commons license.

iPhone 4 Logic Board Replacement

Step Type:

Guide Step Edit Keyboard Shortcuts: