Skip to main content
Help

Xbox 360 S Bottom Panel Replacement

Editing Step 7 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 11 guides that include this step.

Step Type:

Drag to rearrange

Insert a metal spudger through the left middle slit of the bottom bezel, and between the bottom edge of the clip and the left case.

Simultaneously pull the bottom bezel up and rotate the spudger away from the console to free the clip.

In a similar fashion, free the clip at the front of the bottom bezel's left edge.

The entire left side of the bottom bezel should now be free.

Your contributions are licensed under the open source Creative Commons license.