Skip to main content
Help

Canon PowerShot G1 X Mark II Motherboard Replacement

Editing Step 10 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Remove the following three Phillips screws securing the silver plate with a Philips Head screwdriver:

Two 2.9mm screws on the front of the camera

One 1.8mm screw on the bottom of the camera

Lift the silver plate away from the camera.

Your contributions are licensed under the open source Creative Commons license.