Skip to main content
Help

Removing iPad 3 4G Front Panel

Editing Step 13 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 153 guides that include this step.

Step Type:

Drag to rearrange

This step requires you to move the opening pick along the bottom right edge of the front panel. The Wi-Fi antenna is very close to the corner and is easily severed if the adhesive is released improperly.

Do not completely remove the pick from under the front glass, but pull it out just a little bit so that ~1/8" (3 mm) of the tip is still under the front glass.

Slide the tip of the opening pick along the bottom edge of the iPad, releasing the adhesive over the Wi-Fi antenna.

Your contributions are licensed under the open source Creative Commons license.