Step 1 Place the Taptic Engine



• Place the Taptic Engine into its recess in the frame.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2 Install the Taptic Engine screws



• Use a Phillips screwdriver to install the two screws securing the Taptic Engine:
• One 2.2 mm‑long screw
• One 1.7 mm‑long screw
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3 Connect the Taptic Engine
• Use the flat end of a spudger to connect the Taptic Engine press connector.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4 Install the Taptic Engine bracket
• Use tweezers or your fingers to place the bracket over the Taptic Engine press connector.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• Use a Phillips screwdriver to install the two 1.8 mm‑long screws securing the Taptic Engine bracket.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-181000" src="https://www.ifixit.com/Guide/embed/181000/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-181000"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/181000" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview