Skip to main content
Help

OWC Thunderbolt 3 Pro Dock fan replacement

Time Estimate

  • 1 × T8 Torx Security Bit Screwdriver
  • 1 × T10 Torx Security Bit Screwdriver
  • 1 × Thermal Pad (2mm thick)
  • 1 × Isopropyl Rubbing Alcohol- Vodka wont work unless its very pure as it leaves a residue
  • 1 × Spudger
  • 1 × Toilet paperor anything to remove/clean thermal paste and dust
  • 1 × Soldering Iron
  • 1 × Heat GunOr anything that can shrink heatshrink
  • 1 × heat shrink tube
  • 1 × wire stripper, cutters or sharp knife
  • 1 × Lead-Free Solderjust use lead free, your braincells will appreciate you.
  • 1 × Noctua nf-a4x10-flxor any 40mm fan, just make sure it is not more than 10mm thick otherwise it wont fit
Add New

Your contributions are licensed under the open source Creative Commons license.