Skip to main content

ディスプレイ表面のテーピング

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

English
Japanese

Translating step 1

Step 1
Taping Over The Display, Tape over the display: step 0, image 1 of 3 Taping Over The Display, Tape over the display: step 0, image 2 of 3 Taping Over The Display, Tape over the display: step 0, image 3 of 3
Tape over the display
  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass.

  • Lay overlapping strips of clear packing tape over the iPhone's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

  • If the broken glass makes it difficult to get a suction cup to stick in the next few steps, try folding a strong piece of tape (such as duct tape) into a handle and lifting the display with that instead.

ディスプレイのガラスにひびが入っている場合は、作業中ひびが拡大し、怪我をしないようにガラス表面をテーピングします。

透明の梱包用テープをiPhoneのディスプレイ全体に二重にして貼ってください。

この作業によってガラスの破片が飛び散らないよう固定され、ディスプレイを持ち上げたりこじ開けたりする際に構造を保ってくれます。

修理中、ガラスが飛び散ることもあります。保護メガネを装着してください。

このあとの手順で吸盤カップを装着することができないほどガラスが壊れてしまっている場合は、さらに強力なテープ(ダクトテープなど)を折り曲げて取手を作り、ディスプレイを引っ張って持ち上げます。

Your contributions are licensed under the open source Creative Commons license.