Fix Your Stuff Community Store

Reemplazo del marco interno del Mac mini Modelo A1283

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 4

Step 4
Mac mini Model A1283 Internal Frame Replacement: step 0, image 1 of 1

  • Remove the antenna board near the front of the mini by pulling it straight up off the internal frame.

  • If necessary, remove the piece of tape securing the antenna leads to the internal frame.

  • Be sure to keep track of the springs under each of the three antenna boards.

Retira la placa de la antena situada cerca de la parte delantera del mini tirando de ella hacia arriba hasta sacarla del marco interno.

Si es necesario, retire el trozo de cinta adhesiva que sujeta los cables de la antena al marco interno.

Asegúrate de no perder de vista los muelles situados debajo de cada uno de las tres placas de antena.

Your contributions are licensed under the open source Creative Commons license.