/
My Workbench

Get quick access to guides, parts and answers for your devices

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Join
Log In

iPad 3 4G Front Panel Einheit ersetzen kurz

Notice: You are editing a prerequisite guide. Any changes you make will affect all 19 guides that include this step.

Back to Guide
English
German
Previous step

Translating step 2

Step 2
iPad 3 4G Front Panel Assembly Replacement: step 0, image 1 of 3 iPad 3 4G Front Panel Assembly Replacement: step 0, image 2 of 3 iPad 3 4G Front Panel Assembly Replacement: step 0, image 3 of 3

  • Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad.

  • Rotate the LCD along its left edge and lay it down on top of the front panel.

  • Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.

Hebe die rechte Kante des LCDs mit einem Plastic Opening Tool oder einem Spudger aus dem iPad.

Klappe das LCD der linken Kante entlang um und lege es oben auf dem Front Panel ab.

Sei vorsichtig beim Bewegen des LCDs. Das Flachbandkabel ist empfindlich und kann reißen, wenn es zu sehr geknickt wird.

Your contributions are licensed under the open source Creative Commons license.