Fix Your Stuff Community Store

Reemplazo de cubierta trasera de HP EliteBook 840G5

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Spanish
Next step

Translating step 1

Step 1
HP EliteBook 840 G5 Back Cover Replacement: step 0, image 1 of 2 HP EliteBook 840 G5 Back Cover Replacement: step 0, image 2 of 2

  • Use a Phillips #1 screwdriver to undo the five screws. The top three screws are 10 mm and the two side screws are 7 mm.

  • Unscrew the bottom three screws using the same screwdriver.

  • The bottom Phillips #1 screws don't remove from the back plate, but do need to be unscrewed.

  • Some models have a slightly different screw configuration, shown in the second photo.

Usa un desarmador Phillips # 1 para desatornillar los cinco tornillos. Los tres tornillos superiores son de 10 mm y los dos en los lados son de 7 mm.

Desatornilla los tres tornillos del inferior usando el mismo desarmador.

El tornillo del inferior Phillips #1 no se remueve de la placa trasera, pero si necesita ser desatornillado.

Algunos modelos tienen una configuración ligeramente diferente, mostrada en la segunda foto.

Your contributions are licensed under the open source Creative Commons license.